HPLC Guard Columns and Cartridges
Showa Denko America Inc Asahipak NH2P-50G 4A
Guard columns for NH2P-50 series columns, dimensions: 4.0 mm ID x 10 mm L
Waters Corp XBridge BEH HILIC XP VanGuard Cartridge, 130Å, 2.5 μm, 2.1 mm x 5 mm
XBridge BEH HILIC XP VanGuard Cartridges extend analytical column lifetime and performance by removing particulate and chemical contamination from the mobile phase. Optimized to protect 2.1 mm and 3.0 mm I.D. XBridge BEH HILIC analytical columns with 2.5 μm sorbent particles, this cartridge is easy to use, install, and capable of sustaining high pressures in applications run on the ACQUITY UPLC System.
- Extends analytical column lifetime and performance.
- Removes particulate and chemical contamination from the mobile phase stream.
- Optimized to protect 2.1 mm and 3.0 mm I.D. XBridge BEH HILIC analytical columns with 2.5 μm sorbent particles.
- Easy to use and install.
- Can sustain high pressures in applications run on the ACQUITY UPLC System.
- Features BEH Technology C18, 130-pore, and 2.5 μm particles.
- Quality controlled and tested using a peptide map.
Waters Corp VanGuard Cartridge, 100Å, 3.5 μm, 3.9 mm x 5 mm
Symmetry C8 VanGuard Cartridges are designed to extend analytical column lifetime and performance by removing particulate contamination from the mobile phase stream. This cartridge is optimized to protect 3.9 mm and 4.6 mm I.D. analytical columns containing 3.5 μm sorbent particles.
- Extends analytical column lifetime without compromising chromatographic performance.
- Removes particulates and chemical contamination to prevent degradation of column performance.
- Helps maintain the separation efficiency of UPLC™, UHPLC, and HPLC systems.
- Offers a cost-effective solution for protecting analytical columns.
- Compatible with analytical columns having internal diameters of 2.1 mm, 3.0 mm, 3.9 mm, and 4.6 mm.
- Available in a variety of particle sizes and stationary phases for physical and chemical protection.
Waters Corp VanGuard Cartridge, 100Å, 5 μm, 3.9 mm × 5 mm, 3 pk
XSelect HSS T3 VanGuard Cartridges are used to extend analytical column lifetime and performance by removing particulate contamination from the mobile phase stream. This cartridge is optimized to protect all 4.6 mm I.D. XSelect HSS T3 analytical columns containing 5 μm sorbent particles.
- Extends analytical column lifetime and performance.
- Removes particulate contamination from the mobile phase stream.
- Optimized to protect 4.6 mm I.D. analytical columns containing 5 μm sorbent particles.
Waters Corp VanGuard FIT Cartridge, 2.7 μm, 2.1 × 5 mm
Waters Corporation VanGuard FIT Cartridge, 2.7 μm, 2.1 × 5 mm
Waters Corp Symmetry C18 VanGuard Cartridge, 100à , 5 µm, 2.1 mm X 5 mm, 3/pk
Symmetry C18 VanGuard Cartridge, 100à , 5 µm, 2.1 mm X 5 mm, 3/pk
Waters Corp SunFire VanGuard Cartridge, C18, 100 Å, 5 μm, 3.9 mm x 5 mm
SunFire C18 VanGuard Cartridges are designed to extend analytical column lifetime and performance by removing particulate and chemical contamination. This cartridge is installed between the injector and analytical column, ensuring compatibility and optimal protection for various HPLC, UPLC, and UHPLC systems.
- Extends analytical column lifetime and performance.
- Removes particulates and chemical contamination.
- Optimized for 4.6 mm I.D. analytical columns with 5 μm sorbent particles.
- Uses matching packing material for seamless compatibility.
- Manufactured in a cGMP, ISO 9001 certified plant with tested batches ensuring reproducible performance.
- Improves selectivity, sensitivity, and analysis speed.
- Direct-attach, single-unit design minimizes extra volume and reduces leaking.
- Cost-effective protection for 2.1 mm, 3.0 mm, 3.9 mm, and 4.6 mm I.D. analytical columns.
Waters Corp VanGuard FIT Cartridge, C18, 1.7 μm, 2.1 x 5 mm
An ACQUITY Premier Oligonucleotide BEH C18 VanGuard FIT Cartridge, 1.7 μm, 2.1 X 5mm is a replacement VanGuard FIT Cartridge for ACQUITY Premier Oligonucleotide BEH C18 130Å Columns with the Premier VanGuard FIT column design. Existing FIT Cartridges should be replaced when there is evidence of high analytical column backpressure or reduction in desired component resolution.
- C18 chemistry.
- Reversed phase separation mode.
- Hybrid, spherical particle substrate.
- pH range of 1 to 12.
- Maximum pressure of 18000 psi (1240 bar).
- Particle size: 1.7 μm.
- Pore size: 130 Å.
- Premier FIT cartridge format.
- Designed for UPLC systems.
- Inner diameter: 2.1 mm.
- Length: 5 mm.
- Units per package: 3.
Waters Corp CORTECS VanGuard Cartridge, 90Å, 2.7 μm, 2.1 mm x 5 mm
CORTECS Shield RP18 VanGuard Cartridges are designed to extend analytical column lifetime and performance by removing particulate contamination from the mobile phase stream. This cartridge is optimized to protect all 2.1 mm and 3.0 mm I.D. CORTECS Shield RP18 analytical columns containing 2.7 μm sorbent particles.
- Extends analytical column lifetime and performance.
- Improves separation efficiency for sharper peaks and better resolution.
- Reduces analysis time, increasing laboratory productivity.
- Ensures consistent performance and enhanced reproducibility.
- Constructed from high-quality materials for durability.
- Backed by a comprehensive warranty.
- Offers precise and accurate analysis capabilities.
- Compatible with a wide range of mobile phases.
- Convenient 3-pack for uninterrupted productivity.
Waters Corp XBridge Protein BEH SEC Guard Column, 125 Å, 3.5 μm, 7.8 mm X 30 mm
This XBridge Protein BEH SEC, 125 Å Guard Column features 3.5 μm particles based on Ethylene Bridged Hybrid (BEH)-based particle technology and a diol-bonded surface coating. Designed for HPLC-based SEC columns, it separates proteins from 1,000 to 80,000 Daltons. One vial of BEH125 SEC Protein Std is included.
- Ethylene Bridged Hybrid (BEH) particle technology with diol-bonded surface coating.
- Optimized for separating proteins ranging from 1,000 to 80,000 Daltons.
- Includes one vial of BEH125 SEC Protein Std.
- Chemistry: SEC, with gel filtration (aqueous) separation mode.
- Pore size: 125 Å; particle size: 3.5 μm.
- Inner diameter: 4.6 mm; length: 30 mm.
- pH range: 2.5 to 8; temperature limits: 60°C.
- Maximum pressure: 3200 psi (221 Bar).
Waters Corp ACQUITY UPLC VanGuard FIT Cartridge, 1.7 μm, 2.1 mm ID, 5 mm
ACQUITY Premier cartridges are designed to work with ACQUITY Premier VanGuard FIT columns. These cartridges provide fully integrated guard protection for the analytical column, shielding it from matrix and sample contaminants, which helps to extend the column's lifetime.
- Works with VanGuard FIT columns
- Fully integrated guard cartridges
- Protects the analytical column from matrix and sample contaminants
- Extends column lifetime
Perkin Elmer US LLC Brownlee Prep-10 Cartridge Holder, 250 mm
Holder for a single 250 mm Prep-10 MPLC cartridge
Waters Corp WATERS CORPORATION Guard Cartridge, CSH C18, 1.7 μm, 2.1 x 5 mm
These integrated guard cartridges are designed to work with VanGuard FIT columns. They protect the analytical column from matrix and sample contaminants, thereby extending the column’s lifetime.
- Fully integrated guard cartridges
- Protects analytical columns from matrix and sample contaminants
- Extends column lifetime
- System: UPLC
- Technique: LC
- Particle size: 1.7 μm
- Column dimensions: 2.1 mm inner diameter, 5 mm length
- Chemistry: C18
- Separation mode: Reversed phase
- pH range: 1 to 11
- Maximum pressure: 18000 psi (1240 Bar)
- Units per package: 3